IAS Aroid Quasi Forum

About Aroid-L
 This is a continuously updated archive of the Aroid-L mailing list in a forum format - not an actual Forum. If you want to post, you will still need to register for the Aroid-L mailing list and send your postings by e-mail for moderation in the normal way.

  Re: [Aroid-l] LED growlights
From: "Franck R." <fradnai at free.fr> on 2007.03.14 at 09:20:02(15413)
About Metal-halide and high pressure sodium lamps, Patrick Blanc a
French botanist who makes vegetable wall (translate not sure ???) use
sodium lamps of 3500 °K if my memory is good (I could see to confirm the
information if you want, and I think that I have the model of light).
He uses only these lights. But I think that the composition of the
spectrum is not complete because there is always the same problem, not
enough red colour (in the ray 660 and 730nm). The other problem is the
heat ; this type of light products lot of heat and you need to
ventilate to avoid problems.
The T3/T5 can be a good solution to replace but generally here is a
problem about the power that they can give in Lumens. They are a little
poor. It is also the reason for I have preferred to go to the
fluocompact lights. Now I make some studies and observations to choice
the best solution between full spectrum / power in Lumens / quantity of
red colour. The advantage of these lights is the long time life,
consummation of electricity, no heat or very very few, and the facility
to use them. About spectrum I have pictures of different for different
temperature of colour for tubs. So if you are interested I can give
them to you, tell me.
See you
Franck

+More
Note: this is a very old post, so no reply function is available.